logo
품질 임시를 던져 감소되는 것으로 정제된 놋쇠로 만든 그레인 리파이너를 녹이는 것 금괴로 만드세요 공장

임시를 던져 감소되는 것으로 정제된 놋쇠로 만든 그레인 리파이너를 녹이는 것 금괴로 만드세요

Desofin, the trademark chemical powder, would be used to the following alloys: Alloy Class and General Parameters Dosage Expected Results Special Instructions Grain Refinement Deoxy-dation Reduced Casting Temp. Yellow Brass (Over 17% Zn. Sn less than 6%. Under 2% total Al, Mn. Ni, Fe, Si. Pb less ...
품질 자유로운 야금 산업 나트륨을 위한 놋쇠로 만든 금은괴 데조르핀 창립자 공장
동영상

자유로운 야금 산업 나트륨을 위한 놋쇠로 만든 금은괴 데조르핀 창립자

Desofin grain refiner is the chemical powder for metallurgy industry invented by Richard H. Haupt. Mr. Haupt, born in America,engages in brass permanent molding industry in all his life till now. He discovered several metallurgical chemical powders. Among them, I75L mold-release agent was invented ...
품질 꼭지의 중력 주조 방식을 위한 놋쇠로 만든 유동성 창립자 데조르핀 공장
동영상

꼭지의 중력 주조 방식을 위한 놋쇠로 만든 유동성 창립자 데조르핀

The introduction of Desofin: Form of product 50g/capsule, can be put into the cooper melt together with the sealing aluminum capsule packing while being used. Consumption 150 grams capsule for each 1metric ton of melted brass or melted alloy Alloy requirements ◆Suitable for all copper alloy, ...
품질 그레인 리파이너를 던지는 드 산화 저압을 위한 놋쇠로 만든 꼭지 데조르핀 공장

그레인 리파이너를 던지는 드 산화 저압을 위한 놋쇠로 만든 꼭지 데조르핀

Desofin Additive Pat Applied for B2 Alloy. What we can found the smooth surface. The Better Ductility. The Potential Savings: 1. Savings over the cost of purchasing fine grained ingot. 2. Energy savings resulting from lower casting temperature. 3. Materials savings. It's not necessary to refine ...
품질 첨가제를 던지는 관 저압 놋쇠 당 B2 불순물 데조르핀 50g 공장

첨가제를 던지는 관 저압 놋쇠 당 B2 불순물 데조르핀 50g

Form of product50g/capsule, can be put into the cooper melt together with the sealing aluminum capsule packing while being used.Consumption150 grams capsule for each 1metric ton of melted brass or melted alloyAlloy requirements◆ Suitable for all copper alloy, including pure copper (99.85%)◆ Work ...
품질 알루미늄 관으로 캡슐 브론즈 그레인 리파이너마다 50g를 던지기 공장

알루미늄 관으로 캡슐 브론즈 그레인 리파이너마다 50g를 던지기

The expected benefits: Lower the casting Temperatures are possible depending on the size of the part to be cast and the type of mold to be used. Generally between 940 and 980 degrees C for beryllium copper molds. Cracking Tendencies of the parts to be cast are greatly reduced and most often, cracks ...
품질 놋쇠로 만든 용융 데조르핀 제거제 그레인 리파이너 950 도 융해점 공장
동영상

놋쇠로 만든 용융 데조르핀 제거제 그레인 리파이너 950 도 융해점

Desofin in slim aluminum tube of 50g Desofin pat. applied for brass ingot melting. Method of using when melting: Any adjustments to the aluminum or zinc content of the melt should be made prior to adding Desofin The surface of the melt should be reasonably free of slag Desofin should be added to the ...
품질 캡슐 그레인 리파이너 데조르핀 놋쇠 수도꼭지 중력 주조 방식 당 50g 공장

캡슐 그레인 리파이너 데조르핀 놋쇠 수도꼭지 중력 주조 방식 당 50g

Desofin with 50g powder in capsule Method of using : Observing the brass bath surface, especially adding new ingot or turn-overring Adding the proper quantity (generally 1-2 tube) Desofin when finding oxidation or worse fluidity Form of product 50g/capsule, can be put into the cooper melt together ...
품질 50g 망가니즈 브론즈 그레인 리파이너 950 도 융해점 공장

50g 망가니즈 브론즈 그레인 리파이너 950 도 융해점

Method of using : Observing the brass bath surface, especially adding new ingot or turn-overring Adding the proper quantity (generally 1-2 tube) Desofin when finding oxidation or worse fluidity Form of product 50g/capsule, can be put into the cooper melt together with the sealing aluminum capsule ...
1 2 다음